Responsibility for CRN Numbers and Safety

In this space, some questions posed by customers and industry are published in case others have similar questions. Anonymity is preserved. Check back for updates and new correspondence.

Dear Cammar,
If a vessel, fitting, boiler design, or some pressure piping not meeting the legislation requirements and/or that is simply not registered with a CRN number is operated, then so what?
IM Concerned

Dear Concerned,

Safety is a big deal to the public, the engineering profession, and the regulator. Breaking the law is not a good idea.

Unless exemptions apply, operation of pressure equipment (vessels, fittings, boilers, pressure piping systems, etc) that does not meet the legislation, or that is without CRN registration, would be against the law.

Though non-exempt pressure equipment certainly needs to be registered before operation, the equipment also needs to meet the minimum requirements of the adopted codes and standards. In all cases, it needs to be safe.

Committing an offense has potential consequences. For example, in Alberta per Section 68 of the Safety Codes Act, those found guilty are subject to a potential fine of $100000 and imprisonment of 6 months for a first offence, and a fine of $500000 and imprisonment of 12 months for a second or subsequent offence.

So… safety, and responsibility for it, is important.